Mail Configuration

READING MAIL

To read mail on Plan 9, you currently need a Plan 9 system that runs an SMTP server and spools your messages; attempting to read messages from a mounted Unix or NFS file system will not work, as Plan 9 uses different mechanisms to lock mailboxes.

There are a few ways around this, though; upas/fs (see upasfs(4)) can present POP3 and IMAP4 accounts as well as normal mail files. To use it, start upas/fs with the -f option specifying the "virtual" mail file to use. For example,

 upas/fs -f/pop/your.host

Other access methods (instead of "pop") include apop, poptls, and apoptls, imap, and imaps. If you use POP via SSL on port 995, you should use "pops" instead of "poptls".

The appropriate Factotum key to be used is for example:

; auth/factotum -g 'proto=pass dom=pop.gmx.de service=pop user=$your_username !password?'

for POP3.

To use the TLS-enabled access methods to a Plan 9 mail server (poptls, apoptls, and imaps) you need to generate a certificate and key for your mail server and tell the factotum of the server about that key:

You can also use the using ssl page, for detailed instructions.

Login to a unix box with openssl installed (or install /n/sources/contrib/fgb/openssl.tgz) and generate the cert:
unix$ openssl req -x509 -nodes -newkey rsa:1024 -keyout key.pem -out cert.pem

Logout and copy the files back to your mail server
; cp /n/unix/.../cert.pem  /sys/lib/tls/imap.pem
; cp /n/unix/.../key.pem /sys/lib/tls/key.pem

(I think the plan9 tools do a much better job with this, e.g. for tlssrv, what is needed:
auth/rsagen -t 'service=tls role=client owner=*' > /sys/lib/tls/key
auth/rsa2x509 'C=FR CN=*.fakedom.dom' key | auth/pemencode CERTIFICATE > /sys/lib/tls/cert
where FR is a two digit country code, and fakedom.dom is the fully qualified domainname.)

Tell your factotum about the new key...
; ramfs
; cd /tmp
; auth/secstore -g factotum
; auth/secretpem /sys/lib/tls/key.pem >> factotum
; auth/secstore -p factotum
You may also write factotum to /mnt/factotum/ctl
Exit this shell to destory the /tmp ramfs that has your keys in.

Then you must add your mail server's fingerprint to /sys/lib/tls/mail.

If you are connecting to a third party mail server which is already set up for TLS authentication, you only need to teach Plan 9 about the fingerprint of its certificate.

The easiest way to get the fingerprint is to run

; upas/fs -f /imaps/your.host

(instead of imaps you may be using poptls or apoptls) and look at the error message, something like

upas/fs pop3: server certificate 22471E10D5C1E41768048EF5567B27F532F33 not recognized
upas/fs: opening mailbox: bad server certificate

To add this certificate type:

; echo 'x509 sha1=22471E10D5C1E41768048EF5567B27F532F33' > /sys/lib/tls/mail

If you are going to run an SMTP server, you should edit the files /mail/lib/smtpd.conf and /mail/lib/blocked to configure it. In addition, you should ensure that /mail/tmp exists and is world writeable (0777) if you want to receive emails larger than 64k.

Looking in the other direction, Plan 9 comes with POP3 and IMAP4 servers.

SENDING MAIL

To send mail from Plan 9, you need to configure the outgoing mailer; its main configuration file is /mail/lib/rewrite, which is supplied as an empty file. The manual rewrite(6) is worth reading. You'll want to start by copying either rewrite.gateway or rewrite.direct from the same directory and editing it to suit. Setting the smtp= attribute in your network database (file /lib/ndb/local) is all that is necessary to use rewrite.gateway, which sends all mail containing an @ sign to your local mail gateway. Mail to unqualified names (names without @somewhere) will still be delivered to local mailboxes. If you would like all mail to unqualified names to have a default domain added, start with rewrite.direct and edit to suit.

The last rule in the rewrite files calls /mail/lib/qmail, which both queues the message and starts a daemon to try to deliver the messages currently in the queue (see qer(8) for more details). On systems not always connected to the internet, you may wish to use /mail/lib/justqmail instead, which only queues the message, and does not start a delivery daemon. When you are connected to the internet or your mail gateway, you can run /mail/lib/kickqueue to have the daemon try to send mail.

If things aren't going right, look in /sys/log (mail smtp smtp.fail runq) are of interest.

/mail/lib/remotemail, which actually delivers mail via SMTP, contains a default domain name used for unqualified outgoing mail; you will want to change it from yourdomain.dom to something more appropriate. If your SMTP-Server uses SMTP-AUTH to authenticate, add the "-a" flag to the upas/smtp-command (see smtp(8)). Also, note that you need to add your login information to factotum(4):

; auth/factotum -g 'proto=pass service=smtp user=$your_username server=$the_addr_of_your_smtpserver !password?'

Each local user has a mail directory /mail/box/$user; among other things, it usually contains a mailbox and a headers file /mail/box/$user/headers; the contents of the latter are included in all outgoing messages from that user. To add a ``full name'' field to your outgoing mail, add

From: "Glenda" <glenda@myserver.dom>

If you wish to dynamically change your source domain (eg for laptops) the upasname environment variable can be set before executing the mail command; This ignores From: names set in /mail/box/$user/headers. EG

upasname=janet@machine.dom mail fred@machine.edu

SMTP TLS AUTH

Like the situation described above, you need to get the servers certificate fingerprint and add it to the list of authorised fingerprints, for smtp this time.

Try to send email to the server:

;upas/smtp -d -a -h mymachine.dom net!smtp.myserver.dom account-on-server  dest-user@sest-system.dom

this will probably fail with:

220 2.0.0 Ready to start TLS
Wed Dec  1 13:52:01 GMT 2004 connect to net!smtp.server.dom:
220 2.0.0 Ready to start TLS
errors Permanent Failure
QUIT
exits Permanent Failure

now check /sys/log/smtp for the fingerprint

; tail -1 /sys/log/smtp
felix Dec  1 14:17:56 remote cert. has bad thumbprint: x509 sha1=CE3C0D3BDA4B44A353C59EA665B7F8C109714341 server=smtp.server.dom

and install this fingerprint for smtp

echo 'x509 sha1=CE3C0D3BDA4B44A353C59EA665B7F8C109714341' >> /sys/lib/tls/smtp

PROBLEMS

Some SMTP servers refuse to accept mail from clients that don't supply fully qualified domain names when authenticating (HELO or EHLO messages) - an anti-spam measure.

This name is generated from either the site enviroment var, or if that is not set, by appending the sending machines domain to its system name. The domain is picked up from the dom= attribute from /lib/ndb/local.

SEE ALSO

Upas - A Simpler Approach to Network Mail by David L. Presotto - The original paper describing Upas.

/n/sources/contrib/maht/rc/warlock_mail - "Mail Warlock", an interactive script for configuring your outgoing email. See sources repository for connecting to sources, or http://plan9.bell-labs.com/sources/contrib/maht/rc/warlock_mail.